Renovations are thrilling as they restore the aesthetics of your home. However, they are known to leave a lot of mess behind. Whether it is a small makeover or a huge overhaul, it is likely to disturb the cleanliness of your home.
After the dust settles and the work is completed, cleaning up the place is necessary. A post-renovation cleanup is like cherry on top of all the hard work. It eliminates dust, debris, and little remnants from the construction site.
Cleaning is highly important to enjoy the new look of your residence. This way, you will be able to maintain hygiene and keep the health issues away. Dust can cause problems like
irritation in the eyes, throat, and skin. This is why regular cleaning, as well as cleaning after renovation, is essential.
In this guide, we will go through the post-renovation cleaning checklist for homeowners. It will help you tackle each cleaning task appropriately.
1. Eliminate the Visible Dust
Seasoned cleaners always start the
expert end of lease cleaning Sydney by tackling accumulated dust, dirt, loose debris and other allergens. So, you can begin the process by Initiate with an extensive dusting process, reaching high corners, nooks, and ceilings as particles are more than likely to settle there. It is ideal to use a microfibre cloth or suitable dusters to wipe down the walls in a gentle manner.
Get Rid of Plaster and Drywall Dust
Plaster and drywall dust is difficult to removing with a regular dusting or a vacuum cleaner. Here is a quick guide to help achieve desired results:
After removing loose dirt and dust from the surface (using a microfiber cloth or a machine), prepare a cleaning solution by mixing warm water and mild dish soap.
Dip a microfiber cloth into the solution and wring out excess water.
In the next step, wipe down the surface. It is good to clean small sections by applying all your efforts and techniques to remove plaster stains.
Rinse the cloth thoroughly and change the DIY cleaner if required.
Wipe down the surface again and dry it with a clean cloth.
Get rid of any plaster remnants, construction dust, or paint specks. Pay special attention to intricate spots and recently finished surfaces while making use of delicate cleaning techniques. This way, you will be able to prevent scratches or damage to the renovations. Thoroughly dusting will lay a foundation for the cleaning process.
2. Use Suitable Cleaning Methods
Start with eliminating bigger debris through the use of a vacuum cleaner with a brush attachment. Next, wipe the surfaces by using a moist microfibre cloth or a sponge. Dip the sponge in a mild cleaning solution before using. You can prepare the solution by combining mild dish soap and warm water.
For every gallon of water, use one tablespoon of soap. Make sure that the sponge or cloth is not overly dampened to prevent excessive moisture on surfaces.
Clean systemically by starting from the higher surfaces and moving downwards, guaranteeing all the corners are tackled. For tough spots, use a gentle scrubbing technique with a soft-bristled brush. Finish by rinsing the surfaces with clean water and thoroughly dry them. This way, you will prevent water marks and streaks, making way for a
cleaner home.
3. Take Care of the Floor
It is essential to clean the floor to maintain them in a pristine condition. Different flooring materials require different methods. Start by sweeping or vacuuming to remove the loose debris and dust particles gathered throughout the renovation process.
For hard surfaces such as tile or
hardwood floors, prepare a DIY solution by combining equal parts vinegar and warm water.
Then, add a few drops of dish soap to increase the cleaning strength. Utilise this solution with either a microfibre cloth or mop to ensure a thorough cleaning of the floor. Initiate from one corner and work your way across the room. This method is often used for quality end of lease cleaning Sydney.
4. Glass and Window Cleaning
Firstly, dust the window sills, corners, and frames with a soft-bristled brush. Next, utilise the same cleaning you used for the hard floors. Generously spray it onto the surface and wipe it down using a microfibre cloth to ensure a streak-free finish. To tackle tough spots, spray and let the solution sit there for a few minutes before scrubbing through a cloth or sponge.
Finish with rinsing the surface using clean water and wipe it dry to expose
clean windows. You can also use a rubber squeegee to remove excess water and soap residue from your window glass. Run the tool from top to bottom and wipe down the rubber blades with a paper towel or cloth. It will leave your windows and glass surfaces sparkling clean. This is how expert end of lease cleaners in Sydney clean the glass and window surfaces.
Tip: Use white vinegar or castile soap solution to tackle stubborn stains and grime from your windows during post renovation cleaning and achieve the best outcomes.
5. Inspect Appliances and Fixtures
After the renovation, it is ideal to inspect the appliances and fixtures and ensure they are in proper working condition. Make sure they are clean and free of dust or construction residue, as that might negatively affect their personality. Wipe down the appliances such as dishwashers, refrigerators, and ovens using a mild cleaning solution. Examine
light fixtures, faucets, and switches, and if needed, wipe them down in a gentle manner.
6. Ensure HVAC Systems are Clean
Expert end of lease cleaners in Sydney recommend checking and cleaning HVAC systems to ensure they are free of dust buildup and keep the indoor air quality at its best. Utilise a vacuum cleaner with a brush attachment to eliminate dust from the surface of grilles and vents.
Replace or clean the filters to maintain optimal airflow. Consider hiring professionals to ensure a deep clean, especially if the renovation process generated a lot of visible dust. Regular maintenance is key to guarantee clean and healthy air circulation in your residence.
Wrapping Up
Maintaining the visual appeal of your home and preventing dust buildup is crucial to minimise health risks. After the renovation, your home will likely be dirtier than ever.
So, it is ideal to utilise suitable methods to clean all the areas. Apply the steps from this article to eliminate the dust and keep your home clean.
