How To Remove Limescale From Your Bathroom Surfaces

Did you know that an average family of 4 can create up to 7 kg of limescale in a year if their home has a hard water supply? Limescale buildups can damage your appliances and faucets and reduce their efficiency. Almost 85% of homes in Australia are affected by this chalky mineral deposit due to the evaporation of hard water on surfaces. Thus, it is necessary first to understand what limescale is and how it is formed and then find ways to remove it from your bathroom surfaces. You should hire bond cleaning experts in Sydney to deep clean your bathroom and ask them to eliminate any limescale embedded on your surfaces. If you plan on doing this on your own, then there are helpful DIY green cleaning tips given below where you can make your own homemade cleaners to remove limescale.

What Is Limescale

If you notice hard white chalky deposits on the surfaces of your home, this is a limescale buildup. This limescale consists of calcium and magnesium minerals that collect on your surface after hard water evaporates. This hard water is supplied to your home via open water sources and enters your internal household plumbing system. The more minerals present in your water supply, the higher the hardness of the water, increasing the chances of limescale. Therefore, bond cleaning experts in Sydney recommend that you check the water supply in your area to see how hard it is and what the quality is like.

How Is Limescale Formed

Limescale is formed when the calcium bicarbonate in hard water reacts at high temperatures to form insoluble calcium carbonate. This happens when hard water evaporates on a surface and leaves calcium carbonate that sticks to your bathroom surfaces.

What Effect Does Limescale Have

This buildup of limescale not only affects the appearance of your fixtures and surfaces and damages the functioning and efficiency.

Even 1mm of limescale buildup can damage your taps and faucets irreparable.

If you have any heating elements in your bathrooms, like geysers, then a limescale buildup can reduce its energy efficiency.

As limescale continues to build up, your heating appliances will need more energy to run and break down after a point.

That is why it is necessary to deep clean your bathroom to remove and prevent any limescale deposits.

Remove Limescale From Your Bathroom Surfaces

Bond cleaning experts in Sydney have recommended the following tips to help you remove limescale deposits from your bathroom surfaces in a natural manner: 1. Gather Your Cleaning Supplies You should gather the following cleaning supplies to help you remove limescale from your bathroom and keep it spotless:

White Vinegar

Lemon

Rubber bands

Spray bottle

Microfiber cloth

Baking soda

Cup

Toothbrush

2. Remove Limescale From Taps The citric acid in lemon juice and the acetic acid in white vinegar will break down the calcium carbonate minerals and help dissolve and remove limescale. If you have found limescale on your taps, then you should either hire a bond cleaning expert in Sydney to remove them or follow the below DIY steps:

Start by filling a cup with white vinegar or lemon juice.

Next, secure this cup to your tap and use rubber bands to hold it.

This is necessary so the acid from vinegar or lemons can be in constant contact with the limescale and break it down.

Remove the cup after two hours and gently scrub and remove any remaining limescale deposits with a toothbrush.

You should rinse your taps and dry them with a wet microfiber cloth.

3. Remove Limescale From Sinks And Basins

Bond cleaning professionals in Sydney recommend that you first test a bit of lemon juice on your sinks.

Even though lemons are cleaning agents that are free of chemicals, the citric acid in them can damage some surfaces.

If the lemon does not damage the surface, then pour lemon juice into a spray bottle, spray the limescale in your basin, and sink with this solution.

Leave this solution for 30 minutes and wipe off any deposits with a clean microfiber cloth.

Rinse your basin and sinks, and then let it dry.

4. Remove Limescale From Toilet Bowls

Fill a bottle with white vinegar and spray this over your toilet bowl completely.

You should leave this for 3-4 hours, brush away any limescale deposits, and then flush the solution.

If the limescale deposits are stubborn, leave the vinegar solution overnight and add a cup of baking soda to loosen any stubborn stains.

Scrub these stains in the morning and flush your toilets to prevent any future deposits.

5. Remove Limescale From Your Showerhead

Lastly, professional bond cleaners in Sydney recommend cleaning your showerheads with white vinegar to eliminate limescale.

You should fill a plastic bag full of undiluted white vinegar.

Fasten this bag over your showerhead with rubber bands and leave it overnight.

In the morning, you can take a clean microfiber cloth, wipe away the limestone deposits, and let them dry.

Conclusion

Limescale can build up quickly on your bathroom surfaces and cause problems in your appliances and drainage. Thus, you should follow the above natural cleaning tips to eliminate these limescale deposits to keep your bathroom clean and functional. If you want a deeper cleaning, you can always hire expert cleaning services Sydney to help remove limescale and other deposits from your bathroom surfaces.