• Call Us Now 02 9052 5771

How to Get Rid of Mould From Every Surface in Your Home?

bond-back-img-main
How to Get Rid of Mould From Every Surface in Your Home?
  • Hannah
  • Jul 06 2020
Nothing can be annoying than treating nasty moulds and mildew from your bathroom tiles, showerheads and other surfaces around the house. These types of fungus grow in damp and warm places, like your bathroom, beneath the sink, on fabrics, and cardboard boxes stored in damp basements.

The worst part about these moulds is that they can eat out fabric, ceiling tiles, wallpaper, wood and other organic surfaces exposed to moisture, dampness, no direct sunlight and bad ventilation.

The best way to deal with black gunk and spores is to remove them as soon as possible. It is important to keep a regular check on all possible areas where mould and mildew can lurk. Make sure you spruce up every nook and cranny of the premises, especially if you are at the end of your tenancy.

Instead of doing it yourself, you can hire professionals for an affordable end of lease cleaning in Sydney. They can help you get rid of tough stains, including moulds and mildews, using the most effective products and cleaning supplies.

However, if you want to remove mould from every surface in your home on your own, try out the following tips. These hacks are tried and tested by cleaning experts.

Let’s Get Started!

1. Prevent Mould and Mildew


It is good to prevent your home from the spread of mould spores. For that, you can try the following hacks:

Fix moisture issues or the main cause of mould by improving the ventilation system inside your home.

  • Make sure your gutters are clean and water is properly draining. In simple words, fix the water drainage issues.
  • Keep a regular check on exhaust fans installed in the kitchen, bathrooms and the laundry room.
  • Don’t store books, wooden furniture, linens, and cardboard boxes in your damp basements.
  • Make a habit of opening the bathroom door after showering to let moisture out.
  • You can run a dehumidifier to minimise the level of moisture in your living space.

  • 2. Arrange or Prepare Mould Removal Products


    Instead of buying fancy products to kill moulds, you can use some environmentally-friendly ingredients that work wonders in removing these black spores with ease. Here is a list of items that can help you get rid of mould from almost every surface:

    Chlorine Bleach
    Use regular household bleach to eliminate mould from damp surfaces. It is good to dilute it before applying directly on surfaces because it quite a strong ingredient.

    White Vinegar
    White vinegar is acidic in property and can help you get rid of moulds and mildew from different surfaces naturally. Mix it with hot water and apply it on the affected area. Leave the solution and scrub off using a brush.

    Baking soda and Borax Powder
    Also known as Sodium Bicarbonate, it is also one of the best products that can help you rid of mould stains. Mix it with borax because both have a high pH that kills mould without harming the surface.

    Hydrogen Peroxide
    It is less harsh than bleach but can lighten tough stains and mould. Apply only three to 10 percent of hydrogen peroxide to treat mould and mildew.

    All these mould removal agents do not release toxic fumes and chemicals in the air. So, you can try them easily.

    3. Remove Mould From Bathroom Tiles and Grout


    Moulds and mildew can easily grow in the humid environment of your bathroom. If you encounter black spores on your bathroom tiles and grout, treat them immediately.

    Apply diluted bleach solution on the affected area and let it sit for 10 to 15 minutes. This will break down the mould and makes scrubbing a bit easier. Now, take a brush and scrub off the stain with gentle hands.

    Rinse with normal water and wipe dry using a microfiber cloth. Make sure the windows and doors are open throughout the process. You can also hire professionally-trained end of lease cleaners in Sydney if you want to pass your property inspection at the end of your tenancy. They can help you get rid of mould, mildew, grease and other grime from almost every surface with ease.

    4. Shower Curtain


    Moulds and mildews can easily lurk on damp areas such as shower curtains. These are the most overlooked areas when it comes to cleaning a bathroom. Make sure you clean your shower curtain on a regular basis.

    It is good to wash a curtain on the highest water level with detergent. Dry completely before using them again.

    5. Interior Walls and Flooring


    It is good to treat mould stain from hard surfaces such as interior walls, floors and window sills require a bit of elbow grease. You can apply white vinegar or bleach solution and leave it for half an hour before scrubbing.

    6. Kill Moulds from a Carpet


    Be sure to treat carpet and area rugs with mould and a nasty smell. Wear a mask and vacuum clean your carpet to get rid of loose dirt, dust particles, pet hair and bacteria before removing mould stain. Apply baking soda and borax solution on the mould and let it sit for 10 minutes. This will help you get rid of tough stains with ease.

    Now, vacuum the affected area to remove residue of a baking soda and borax mixture and let air dry the carpet completely.

    7. Wooden Furniture and Other Surfaces


    Removing mould from wooden furniture, cabinets, and panelling requires a vacuum cleaner. It is good to vacuum the loose spores using the brush attachment. Make sure you clean small areas using a cloth dampened in a white vinegar solution.

    Rinse with a clean cloth dampened in water and dry immediately with a fan. Wipe off all the wood surfaces and prevent the spread of mould and mildew.

    8. Painted Walls


    Mould spores can quickly grow on walls if there is bad ventilation. Wear rubber gloves and apply the bleach solution with a scrub brush. Let the solution sit for 10 minutes before rinsing. Make sure you dry thoroughly using a fan. Scrub the walls carefully it is painted.

    Conclusion


    These are some smart ways that can help you get rid of black mould and mildew from every surface of your house. Use natural cleaning agents to treat mould stains quickly and effectively.

    If you are at the end of your tenancy, consider hiring professionals for high-quality end of lease cleaning in Sydney. They can help you get rid of all types of tough stains, mould, mildew and grime without giving you a hint of stress.